Constructions sites accidents are very common in White Plains, as construction workers often have to deal with dangerous equipment and work with hazardous and unsafe materials. However, the equipment and machinery produced today are the safest and most reliable products ever made. A comprehensive safety program should not only be in place at all of your jobs, but it should be relevant, timely, frequently referenced, and backed up by top management. Your employer is required to provide his or her staff with the appropriate training and information to ensure they are aware of how to keep safe at the workplace. If you are on duty, and you have been injured, then you should contact a construction site accident attorney immediately, to protect your rights and get the compensation from your employers. Some safety precaution tips to avoid Construction Site Accidents in White Plains include:
Fall arresting systems including lifelines, body harnesses, and other similar equipment pieces can be used when fall hazards cannot be addressed by employing railings, temporary floors, nets, and other means.
People who set up scaffolds must to be certified to do so, and a certified individual must also ensure that they comply with safety requirements should check them daily.
All slips should be cleared up immediately, and wet floors should be properly signposted to warn of danger. Make sure workers wear proper footwear with good traction that is kept in good repair.
Be sure that the electrical equipment and wirings are away from dampness and water. Fire extinguishers should be installed everywhere.
The Chemical Hazard Communication plan and other important information must be available to all employees. The labels of all hazardous chemicals should be intact, and clearly readable. Wash your eyes and hands after finishing your work.
If you are working with concretes, always wear appropriate gloves to avoid chemical burns.
Wear hard hats, safety glasses with ANSI Z-87 designation, dust masks to prevent respiratory problems, and earplugs for hearing protection.
Designated -safe zones- for general use of cell phones by workers.
Daily and pre-shift inspections should be performed and documented by the crane operator, or other properly trained representative. All cranes must have load charts in cabs. All crane operators must possess certification from the National Commission for Certification of Crane Operators (NCCCO).
All flammable liquids must be stored properly.
-No smoking- signs should be properly placed, and there should be portable fire extinguishers throughout the work establishment.
One person should be present at all times during drilling operations, with the sole responsibility of assuring the observance of all safety procedures. This person should be trained in the use of all recommended safety equipment. Disclaimer: The contents of this page are general in nature. Please use your discretion while following them. The author does not guarantee legal validity of the tips contained herein. William H. Cooper: William H. Cooper began practicing law in a large New York City law firm before joining the law firm of Marvin A. Cooper, P.C., in 1991. Over the years, he has established himself as one of the most successful personal injury law practices in the New York Metropolitan Area. Since 1960, the law firm of Marvin A. Cooper, P.C. has provided expert legal advice, services and representation to clients residing in the Bronx, Westchester, Kings, Queens, New York, Rockland & Nassau Counties. His office is located at 245 Main Street, Suite 510, White Plains, NY 10601. For more information, visit http://www.cooper-law.com/ or email at . You can also call him at 914-357-8911/ 212-385-1954/ 718-619-4215 or Fax at (914) 428-4126.
Construction Equipments Supplier – Understand How To Select A Right Manufacturer!
Construction is the lifeline of modern economy. The defined goal and target in it, can be attained using great equipments with higher success rate and accuracy. The greatest civilization of the past has reached their peak using tool and equipments of different types. Now with the advancement of the technology, it has become much easier for mankind to reach the peak of modern civilization. The construction equipment suppliers are the one who provide this equipment to the builder and the construction worker, so that the work can be completed timely.
Construction Equipments Supplier deals in different kind of equipments used during construction of a project take place. These equipments may include simple tools to the most complex tool available in todays time. Some of the examples of such tool are the trucks, material transport vehicles, cranes, bulldozers etc. Most of the equipment are generally given on contact basis and are generally return back to the supplier after the completion of the project. However there are options available were these can be given to the construction company completely.
Construction Equipments Supplier deals in various types of equipment, a list of some of the crucial equipments and their usage is given below.
Cranes: This is specially designed machine which are used to transfer material faster from low lying areas to the higher areas. The crane is a generally used to outperform the human beings by transferring things at faster pace. Generally a crane is used to carry material like huge concrete mixes, fragile materials like glass or granite bars to higher locations in the uncompleted buildings. Please note that a crane is huge construction instrument and hence need especially experienced operator.
Bulldozer: The Construction Equipments Supplier provides bulldozer as per the need of the clients. The bulldozer is a special equipment which help in leveling ground and also cleaning huge debris of waste materials. Bulldozer is a must for all construction firm and help in getting advantage over human labor force.
Others: Apart from this two major equipment there are other important equipments without which the construction sector would be incomplete. Some of such equipments are specially designed elevator. These elevators are used at the site of construction and are specially designed to provide faster completion to the transport works and raw materials from one place to another. Some of the other important equipment that Construction Equipments Supplier provides remains equally important for the construction to get better output.
One should ensure that the equipments that the supplier provides should be well validated and examined. If the criteria are not meet the clients have full rights to reject the contract of product delivery. The supplier should also ensure that the product quality is maintained and a thorough check is made before the delivery of the product is made. The supplier should also check that is the equipment should be return back in working condition in case there is equipment return contact.
Why Are Risk Assessments Important For The Construction Industry
The construction industry is an area that is full of potential risks and therefore a thorough risk assessment is essential for any project. The construction industry is one that has the potential for a wide range of health and safety issues to rear their head, and carrying out a risk assessment is one way to ensure that the chance of any incidents occurring is as small as possible, protecting everyone involved with the project.
Risk assessments not only involve identifying potential risks of a construction project but also weighting these against numerous other factors, including contractual obligations, financial constraints and the requirements of the proposed projects. It is important to consider the health and safety risks of a construction project in conjunction with these other factors and not as singular problems that are not affected by other aspects of the construction project, doing this could mean leaving yourself open to other risks you may not have initially considered or prepared for.
There are numerous qualified health and safety consultants that can be employed to carry out professional and thorough health, safety and risk assessments and have experience in a wide range of settings, including within the construction industry. Having an expert carry out a risk assessment on any construction project is imperative, especially as construction is often considered a high risk area, and these risk assessments can highlight issues that you may not have even considered could be a risk or potential problem, allowing you to prepare for potential problems and minimise the chance of them occurring.
Often to coincide with risk assessments many companies further this by employing the same companies to carry out air testing of the environment after project completion to ensure it meets and complies with UK building regulations. There are specialist risk assessments and air testing companies across the country that have experience in a number of fields including the construction industry. These often provide services locally, for example specialising in risk assessment in the Dorset area and air testing Bournemouth.
When undertaking any project, whether this is a construction project or any other one it is imperative to consult with experts and have a thorough and complete risk assessment carried out prior to starting. And by contacting the experts you can ensure that all the risk have been evaluated and health and safety measures have been put in place to reduce the risks to everyone involved.
Tips to Get the Best Office Construction Services at the Most Reasonable Cost
Developing the business operation house is one of the prime objectives of every business owner. In recent times, when most of the owners of different business agencies desire to set up their commercial units in the prime places in a city or town, they aspire to develop the houses in the most lucrative ways, so that they can get a house of modern design and with all the facilities, available in the modern houses. Not only getting the best environment to operate the agency becomes possible by getting a well developed commercial complex for a business agency, but getting the maximum production also becomes possible in this way. Therefore, obtaining the best designed commercial house is one of the important objectives of all the business houses. Though, some of the business units operate their business through rented rooms; still, it’s not the suitable alternative to operate a business through own business house. As the number of commercial units is increasing day after day and most of the owners of the newly developed agencies desire to set up their commercial unit in the prime location of a city, therefore, finding out the suitable space in the city, which is ready to develop becomes a tough job for them.
In addition, developing a building either for residential or commercial purpose is a time taking job. As most of the families as well as the commercial houses desire to save their valuable time by saving the time, required to develop a building for their use, therefore, they desire to get the readymade houses. In recent times, those who dream to get a readymade house for them, desire to find the best house that develop houses to sell to their targeted clients. Therefore, when you will also be in need to buy a real estate property, you will be desirous to search out the most reliable agency that offer quality Office construction services at the most reasonable costs. You either may own a land or may not to develop your commercial unit.
No matter, whether you have a ready plot to develop a house or not; by contacting these agencies you will be able to find your desired house at the most prime locations in your city, which will suit the best to operate your commercial unit. This is the reason; the very first thing that you will have to do to find out your most suitable house in your desired location in your city is to search online to search out the most reliable agencies. By finding many of the professional agencies online that develop commercial complexes, you may fall in dilemma in choosing the best one. At this juncture, taking decision is though tough; still, not unattainable, as not all the agencies have similar experience. You may find many agencies that offer expertise Office fit out services as well with the building developing services. Therefore, if you intend to find out the best source that will fulfill your dream in the best way by offering you your dream plot or well developed building to run your commercial unit, then following these guidelines will be profitable for you greatly.
How Caulks And Sealants Are Used In The Modern-day Construction Industry
A trip to your local home improvement store can be an overwhelming experience for the average person, especially if you’re trying to figure out which caulks and sealants to use for your exterior home improvement project. Unlike the interior, the exterior faces high UV exposure, extreme temperatures and the requirement to stay 100% waterproof.
When you’re dealing with silicone caulks, you have a non-paintable surface, with poor UV performance. Although water based and latex caulks have good paintability, they also have high shrinkage, poor elasticity and poor UV performance. Synthetic-rubber (polyurethane) sealants and tri-polymer sealants (silyl terminated polyether sealants) can do it all: paintable, great moisture sealing, no or low shrinkage, and very good UV resistance. Many are also pre-tinted in popular colors. These include the popular NP1 (polyurethane sealant), Sonolastic 150 VLM, and Novalink sealants.
All of these sealant and caulk materials are heavily advertised and marketed with super flashy packaging, labels and all kinds of fancy logos. If you’re looking for a high performance caulk or high performance sealant, you can literally be confronted with hundreds of brands and companies that claim to have the best product for your needs. So what can you do, when you are bombarded with all kinds of choices?
Each brand of caulk generally has its own special and unique qualities. Although, it is in your best interest to read all of the labels and also follow the company specifications, for the use of the caulk and sealant, the very thing you want to know may not be found on the labels of the containers at all! Many of the best products are architectural / commercial grade and not generally available to the public.
Sealant was originated through the needs for exterior finishing in the home building industry. Caulk was originally a term that was used to describe the sealant material used to build boats. Many companies and manufacturers these days are using caulk as an all-purpose word to describe paintable interior grade products. Sealants by definition have at least /-25% elongation capability over a long-term period and are UV resistant. Advanced sealants are 100% solids and offer up to 100% elongation.
Most of the general public use caulk and sealant interchangeably to serve the same basic purpose, which is to fill gaps between building materials and to shield materials from air and water.
Although sealants and caulk work the same basic manner, they both also fail for the same basic reasons. There are three major types of caulk failures that you will encounter. These are substrate, cohesive, and adhesive. The bond that is put between the substrate and the caulk can actually fail, making the caulk tear and break down. Caulked joint problems are also very common and are usually due to the substrate not being effectively prepared or using the wrong product all together.
So, before you choose a certain kind of product, you want to really think about how you will be using it and for what purpose. You will also want to consider the area or location you are going to apply the caulk or sealant.
For example, if your intent is to seal the area around the base of a toilet, sink, bathtub or shower, it will be imperative that you purchase a product that both mildew-resistant and durable enough to survive scrubbing and chemical cleaning. If your intent is going to be to use sealant or caulk between wood clapboards and vinyl windows, then you’ll need to purchase a product that is able to bond very well to both types of materials and is weather resistant.
You will also want to keep humidity, temperature and moisture in mind when you are shopping for caulk or sealant. Water-based caulks not recommended for outdoor projects, because these products do not withstand the hot-to-cold and cold-to-hot weather changes, as well as other harsh weather situations. If you are living in an area that is below 50F during the time you need to apply sealant, then you’ll probably want to use a silicone sealant, instead of polyurethanes, because polyurethanes are very difficult to apply in chilly conditions.
Other Applications: For sealing skylights, glass domes, greenhouses and such, Sonolastic Clear 25 is a popular product. For Kynar or siliconized paint finished metal roofs, a special sealant formulated to seal to these surfaces is a must. Products such as Duralink are popular. For repair of swimming pool tile grout lines, polyurethane sealants are excellent. Products like Ultra provide a very durable seal, which can survive in areas where grouts fail quickly. Ultra is also used as a pickproof sealant in security applications.
To the delight of many, who prefer the do-it-yourself project, certain caulks and sealants can be color-matched to paints, tiles, grout, wallpaper and even carpeting. The beauty of these products is that they can be color-matched while they are still in the product tube. NP1 is also available in many popular pre-formulated colors. Any good home building products store will be able to help you color-match your caulk and sealant to your desired color. Once the caulk has cured, then it will precisely match the color you were seeking to acquire.
In summary, let’s review your options again:
1. Water-based caulks are the easiest to work with. They have a smooth, thin and consistent flow, and they are easy to apply with almost any tool. These products cure quickly, have very little odor, and the clean up is easy with water.
2. Silicone caulks and sealants are good for interior or exterior areas, which will not be painted and are good for areas that will be exposed to extremely cold weather, certain metals, and glass. Silicone materials do not repair well (nothing wants to stick to cured silicone material, not even more silicone)
3. Synthetic rubber sealant is best used for areas with high movement and dissimilar materials. These materials can be painted and are designed for long-term exterior exposure. There is also less chance that the synthetic rubber bond will break during movement. Common applications are roof tile repairs, roof moldings, and roof to wall sealing, window frame sealants, and doorsill sealant.
4. Self Leveling Expansion Joint Sealant, such as SL1 and SL2, are used to fill and seal the expansion joint gaps in concrete and driveways.
5. Tri-Polyimer sealants, such as Sonolastic 150VLM are the next generation. Although somewhat more expensive, they offer superior exterior performance.
6. New Hybrid products are available that defy all classifications. Using these kinds of sealants can yield a lot of surprises, so be sure to read the instructions carefully. Some of these products tend to expand upon drying, so it is best to test them out in an inconspicuous location before actually using them on your project.
Print this article and take it with you when you are shopping for caulk and sealant. Review it and then follow any instructions on the containers of the products you buy. It is our hope that this quick tutorial will help provide some clarity on exactly what products you should buy for your home improvement or home construction project.